Atlanta GmbH Products

Atlanta Integrated Rack and Rail

Manufactured by: Atlanta GmbH
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782. webenquiry@motiontech.com.au

Widest range of racks available on the market. This program puts an extensive spectrum at the designer especially in the field of high quality racks which solves just about any application requirements presented.
Milled racks, racks with hardened and ground teeth, integratable racks for guides.

  • racks for direct assembling with guides
  • teeth position 90° or 180° to the rail
  • straight or helical tooth system
  • design milled or ground and hardened

Atlanta Preload Pinion Shafts

Manufactured by: Atlanta GmbH
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782. webenquiry@motiontech.com.au

Pre-load pinion shafts consist of an output shaft, a helical split pinion and a pre-load unit. The split pinion is manufactured as a unit with an axial distance of 1mm.
By reducing this distance between the pinions (axial displacement of the outer pinion) the backlash is reduced and pre-load initiated when teeth are in mesh with the rack. A defined pre-load torque between rack and split pinion can be produced by means of the pre-load unit.