Packaging Machines : Product Category

PolyPack Clear and Printed Film Shrink Bundler

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Polypack’s CLEARPRINT machines produce bulls-eye wraps using either clear or print registered film. These machines operate at speeds up to 60 wraps per minute single lane and up to 120 per minute in dual lane. These shrink packaging machines can be manufactured to run unsupported, pad-supported or tray-supported product. Polypack’s CLEARPRINT wrappers index product into an overhead flight bar assembly. The flight bars advance collated product in time with our patented film delivery system.
POLYPACK’S CLEARPRINT SERIES packaging machines are the simplest, most versatile, easiest to change over, most compact, most affordable and most cost effective automatic print registration wrappers ever produced.

PolyPack Continuous Motion Forming Head Machine

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Polypack’s CFH series machines are continuous motion high speed total closure shrink wrappers that use a forming head to multipack a variety of products. The shrink bundles are sealed on both sides and shrunk for increased product protection. Total Closure multipacks are much more resistant to mishandling and warehouse conditions, and they present a nice, continuous surface for retail packaging applications.
Polypack’s CFH series machines are designed to provide complete enclosure of bundles with polyethylene, polyolefin or PVC films. These machines can also be designed to handle print-registered film for retail packaging. These high speed machines are available at speeds of up to 70 cycles per minute, and are available
in both horizontal and vertical sealbar configurations. For round products, Polypack also offers an integrated label-orientation system for shelf-ready packaging that engages consumers head-on.

PolyPack Continuous Motion Sealbar Machine

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Polypack’s CMS series machines are inline shrink wrappers running in continuous motion, designed to provide a bullseye wrap to products longer than 4 inches. These machines have belt-to-belt transfers, controlled by motor inverters for positive transfers. The CMS series shrink bundling machine can be installed at the end of a tray multipacker to shrink wrap each tray after they are formed and loaded.
Polypack’s CMS series machines are available as stand-alone systems that can either be handloaded or fed by an existing conveyor. The CMS series machines are also available with a wide array of product collation modules as well as a pad feeder to create pad-supported shrink multipacks.

PolyPack Forming Head Inline Shrink Wrap Machines

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Polypack’s FIL series machines are intermittent motion total closure shrink wrappers that use a forming head to wrap products with rectangular or round profiles. The FIL can be designed to run everything from small trays to 12 foot or longer rolls. The pack is sealed on both sides and shrunk for increased product protection. Total Closure wraps are resistant to mishandling and warehouse conditions, and they present a nice, continous surface without seals obscuring the branding.

POLYPACK’S FIL SERIES machines are designed to provide complete enclosure of bundles with polyethylene, polyolefin or PVC films. Thiese machines can also be designed to handle print-registered film for retail packaging. These high speed machines are available at speeds of up to 25 cycles per minute, and are available in both horizontal and vertical sealbar configurations.
Automatic collation modules are available for orientation, rotation and stacking.

PolyPack Forming Head Shrink Wrappers

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Polypack’s FH series machines are intermittent motion total closure shrink wrappers that use a forming head to multipack a variety of products. The shrink bundles are sealed on both sides and shrunk for increased product protection. Total Closure multipacks are much more resistant to mishandling and warehouse conditions, and they present a nice, continuous surface for retail packaging applications.
Polypack’s FH series machines are designed to provide complete enclosure of bundles with polyethylene, polyolefin or PVC films. These machines can also be designed to handle print-registered film for retail packaging.

PolyPack Handle Pack Series

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Handlepack machines apply carry handles to all types of multipacks and single unit products, including products packaged in paper, corrugate and shrink wrap. Handlepack machines are compact in size and provide easy, secure access for reloading handle supplies or performing routine machines maintenance.

PolyPack Inline Bucket Shrink Bundler

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Polypack’s ILB series shrink bundlers are intermittent motion shrink bundlers that use a bucket conveyor to wrap a wide range of products. They are available in hand-loaded models, or with a fully automatic product collation modules designed specifically for your application. Any products that can fit onto the bucket can be wrapped in bullseye shrink. For unstable products such as ovals and tubes, Polypack offers a patented ROKH® pick & place gantry
that automatically picks up the product and places it onto the bucket conveyor for wrapping. Combined with servo-driven technology, the ROKH® pick and place system can load products quickly and accurately, and the system can be fine-tuned to transfer products with unprecedented precision.

PolyPack Inline Sleeve Wrapper

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Polypack’s IL series machines are inline shrink wrappers designed to provide a bullseye wrap to products longer than 4 inches. These machines have belt-to-belt transfers, controlled by motor inverters for positive transfers. The IL series shrink bundling machine can be installed at the end of a tray multipacker to shrink wrap each tray after they are
formed and loaded.
Polypack’s IL series machines are available as stand-alone systems that can either be handloaded or fed by an existing conveyor. The IL series machines are also available with a wide array of product collation modules as well as a pad feeder to create pad-supported shrink multipacks.

PolyPack Jacket Pack

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

With the Jacket Pack™, a sheet of cardboard is die-cut, folded and glued on a single flap. On a traditional RSC, the flaps overlap each other and are located at the bottom and at the top, as the case is erected and then filled from the top. The Jacket Pack™ system reduces the amount of corrugate overlaps down to a single one, and eliminates the top and bottom of the case. A shrink overwrap seals the case, providing superb palletizing strength, product protection and distribution
integrity.
Polypack Jacket Pack™ system is also available as a double U-Board configuration for glue-free operation.

  • Save up to 50% on corrugated material costs
  • Fast ROI on equipment through material costs alone
  • Provides stacking/palletizing support
  • Jacket is formed tightly around the product
  • Multi-layer packaging capability

PolyPack Label Orientation Systems

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

LABEL ORIENTATION SYSTEMS uses an electronic eye and a motorized wheel to rotate products to a specific point. The orientation system rotates the product according to their label so that they are all facing in the same direction in the multipack, giving products their maximum shelf appeal. To facilitate the scanning of products, this system can rotate the product to position the UPC codes in a more accessible manner. In addition, the product orientation system can be used to rotate cans with handles, such as those found on paint cans.
Polypack’s LO series mare available as stand-alone units, or they can be installed on the infeed of a shrink wrapper,
illustrating the effectiveness of our modular design.

  • Can be implemented on all Polypack equipment
  • Shelf ready multipacks with labels facing outward
  • Ideal for club store retail packaging
  • Available at speeds up to 60 packs/min

PolyPack Pharmaceutical Shrink Bundler

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The PHARMA series shrink bundlers are compact, intermittent motion machines designed to collate and shrink wrap pharmaceutical products. This Polypack model uses a motorized pusher to provide smooth, positive transfers. This pharmaceutical shrink wrapper is capable of handling both rounded and squared containers, such as vitamin bottles and small cartons. These compact bundlers are ideal for nutraceutical, pharmaceutical, and personal care products.
Polypack’s PHARMA series integrates state of the art design, construction, operation and safety features. These machines are designed to respond to the needs of the pharmaceutical and nutraceutical industries. These machines are very compact and can multipack small bottles, vials, medicine boxes, medical tubes, and other medical, pharmaceutical and nutraceutical packages of different shapes and sizes.

PolyPack Pusher Driven Shrink Bundler

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Polypack’s PH series shrink bundlers use main pusher and seal bar designed for wrapping individual products as well as for
collating products into multipack configurations. The PH series machines are available with various infeed and collation modules. The PH series is also available with an integrated pad dispenser to create pad-supported shrink packs.
Polypack’s PH series uses a main pusher assembly to transfer and/or collate products into the wrapping section of the machine. When necessary, Polypack uses gates, barriers and decompression plates to control the back pressure of products entering the machine, which ensures smooth product flow throughout the entire shrink wrap process.

PolyPack Tango Series

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Polypack’s TANGO series machines produce bulls-eye wraps using either clear or printed film. These machines operate at speeds up to 20 wraps per minute single lane and up to 40 per minute in dual lane. The TANGO can be manufactured to run unsupported, pad-supported or tray-supported products. Polypack’s TANGO shrink wrappers index product into an overhead flight bar assembly. The flight bars advance collated product in time with our patented film delivery system.
POLYPACK’S TANGO SERIES packaging machines are the most affordable and most cost effective automatic print registration wrappers ever produced. They are offered with various infeed options to best suit your packaging needs.

PolyPack Tray Loaders/Formers

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

TRAY LOADER/FORMERS are extremely versatile, easy to operate, and highly reliable. Polypack offers intermittent motion machines that collate products into trays at speeds up to 20/min. Polypack also offers continuous motion machines running at speeds up to 50 trays per minute. Products are stabilized and controlled throughout the entire process. Adjustments for different tray sizes are made quickly and easily. The TR can be integrated with a Polypack shrink wrapper to provide a
secure, protected package ready for distribution.
POLYPACK’S TR SERIES machines offer versatility to run various configurations including multi-layer formats.
They can also be used for pad-supported applications.

  • Create tightly packed trays for distribution & retail
  • Huge material costs savings compared to RSCs
  • Run multiple product collation configurations
  • Combine with Polypack shrink wrapper for a total end-of-line packaging system solution

PolyPack Tube Shrink Bundling System

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Polypack’s TUBE series shrink wrap machines save money by eliminating inner chipboard cartons and dividers in a master case. These machines utilize our patented pick and place technology to pick up tubes and place them directly onto the film for shrink wrapping. This system eliminates any additional transfers, making it the ideal solution for these hard-to-handle containers. These machines are available at speeds up to 180 tubes/minute and they are also available with an optional integrated case packer. TUBES can be shrink wrapped in 3-packs, with or without inversion. They can also be wrapped in 4-packs and 6-packs for distribution purposes. Polypack’s pick & place system can also be used to shrink wrap pouches and small, lightweight bags.

PolyPack Wrap around Case Packers

Manufactured by: PolyPack
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

With corrugated wraparound packaging, a sheet of cardboard is die-cut and folded. For a traditional RSC the flaps, overlapping each other, are located at the sides, and the case is generally filled from the side. Wraparound packaging equipment significantly reduces the amount of corrugate overlaps while still providing a strong case that delivers superb strength for palletizing and distribution . The wraparound case delivers a huge amount of material costs savings over a traditional RSC.
POLYPACK’S WR SERIES machines offer versatility to run various configurations including multi-layer formats.

  • Create dense distribution cases & use less corrugate
  • Save up to 30% on materials costs
  • Automatic changeovers for decreased downtime
  • Increased stacking strength for palletizing
  • Multi-layer packaging capability