LINEAR MODULES : Product Category

Chieftek (CPC) Compact Linear Motor Stage

Manufactured by: Cheiftek
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

CLS is a series of structurally compact linear motor modules. It tightly integrates a ironless linear motor, linear guide, optical scale and base. With its zero cogging force, high acceleration, high precision and smooth motion. It is high suitable for in applications such as AOI equipment, laser cutters, pick-place and scanning.
Compared to traditional ball screw modules, CLS series with direct drive coupling provides superior precision and velocity under many thrust output conditions. At the same time providing the same highly integrated mechanical design. Enabling increased productivity and reliability as a direct replacement.

Kollmorgen Electric Cylinder

Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Kollmorgen Electric Cylinders offer a cost effective solution for linear positioning of supported or pivoting loads. They are descendents of hydraulic or pneumatic cylinders with many of the same design features but offer the benefit of pr viding a simpler and cleaner transmission.
When high thrust is required these rod type cylinders have the advantage over other linear components because the thrust is transmitted in-line. They also have the advantage of being isolated from the work area so can retract during other operations.
Flexibility in mounting allows either rigid or pivoting options depending on the requirement of the application. In addition to mounting options a wide variety of servo and stepper motor and drive products are offered as an integrated solution to provide the most cost effective combination of thrust, speed and positioning accuracy for your application.

Rollon Uniline System

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Uniline is a family of ready-to-install linear actuators. They consist of internal Compact Rail roller sliders and steel-reinforced polyurethane belts in a rigid aluminum profile. Longitudinal seals enclose the system. This arrangement provides the best protection for the actuator from soiling and damage. In the A series, the fixed bearing rail (T-rail) is mounted horizontally
in the aluminum profile. Versions with long (L) or double (D) sliders in one axis are possible.
The most important characteristics:

  • Compact design
  • Protected internal linear guides
  • High traversing speeds
  • Grease-free operation possible (depending on the application. For further information, please contact our Application Engineering department)
  • High versatility
  • Long strokes
  • Versions with long or multiple sliders available in one linear axis

Preferred areas of application:

  • Handling and automation
  • Multi-axis gantries
  • Packaging machines
  • Cutting machines
  • Displaceable panels
  • Painting installations
  • Welding robots
  • Special machines

Technical data:

  • Available sizes [mm]:
    Type A: 40, 55, 75, 100
  • Length and stroke tolerances:
    For strokes <1 m: +0 mm to +10 mm (+0 in to 0.4 in)
    For strokes >1 m: +0 mm to +15 mm (+0 in to 0.59 in)

Serapid Linear Beam

Manufactured by: Serapid
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The Serapid Linear Beam is a rodless linear actuator with a thrust capacity of up to 160kN (35,000lbs) and a stroke of virtually any length. It runs fast and smooth, using the robust and reliable Rigid Chain. Working purely mechanically, this actuator is as well suited for the clean-room as for the harsh factory floor, or any other environment. A full range of options allow adaptation to your individual conditions. Heavy duty models are guaranteed over 1 million cycles of full-load, permanent operation.

Rollon Plus System

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

TH linear actuators are rigid and compact, ball screw driven linear units, that enable high positioning accuracy and repeatability in all process phases. With optimal performance assured, TH actuators have a repeatability within 5 μm.
Thrust force transmission is achieved by means of super high efficient ball screws, which are available in several precision classes and a variety of leads. Linear motion is based on two or four preloaded re-circulating ball bearing blocks, with ball retainer technology, mounted on two precision aligned parallel rails. The TH series is available in single carriage or double
carriage versions to meet different load requirements.
The TH linear units also feature safe rail and screw lubrication through a dedicated channel for each component. The incredibly compact structure of the TH actuator makes it the ideal solution for applications where space is limited.

  • Extremely compact dimensions
  • High positioning accuracy
  • High load capacity and stiffness
  • Preloaded ball screw
  • Block with ball retainer
  • Internal protected rails and ball screw
  • Safe lubrication through dedicated channels for each component (block and ball screw)

Rollon Tecline

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Our tecline linear system range is suitable for the handling of loads from 10 up to 1000 kg, by manufaturing one or more axis systems according to the customer requirements.
Our main application fields are: robotics, palletization, production line, logistics and manufacturing machines with Cartesian axis movements.
Our products stand out for their:

  • easy and quick assembly
  • high quality and competitive performances (profiles up to 12 m)
  • reduced and simplified maintenance
  • wide range of integrated solutions
  • possibility of customised solutions
  • constant technical support and CAD drawings available

Our Tecline linears strong points are:

  • Solid beams obtained from aluminium alloy extruded profiles
  • High-performance aluminium casting alloy plate and preset for tool assembly
  • Adapting plate suitable for any commercial available gearboxes
  • Fixed and oscillating roller slides, which can be adjusted through an eccentric bushing
  • Without play and sealed rollers with a “for life” lubricating system
  • Tempered or induction hardened and machined strong V-shaped steel guide rails
  • Adjustable limit stops provided with rubber buffers
  • Wide range of accessories for 3 or more axis linears

Rollon Modline

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Modline linear modules are ready-to-use linear guide systems with high accuracy, speeds and load performances.
Our experience in the fields of the automotive plants, painting, plate working, manufacturing machines and palletization
systems has allowed us to widen our product range with the most advanced technical solutions.
Our products stand out for their:

  • high quality and competitive performances (profiles up to12m)
  • without play transmissions achieved by high torque couplings
  • beams with transversal stiffening ribs and preset for threads on profile ends
  • accurate scaling and consequent reduced maintenance
  • fast and accurate belt or without play screw drives
  • the most complete range of accessories
    The Modline linear module strong points are:
  • Acomplete series of linear units to build up 3 or more axis cartesian robots
  • Linear modules with linear guides suitable for parallel assembling
  • Choice between strong steel linear guides with rollers or accurate caged ball roller slides and guides
  • Choice between mobile carriage or fixed carriage and mobile profile
  • Wide and complete solutions for control systems programmable cards on request
  • On request: assembling of E-chain cable carriers, reduction units, stiffening angle bars
  • Drawing worked carriage plates
  • Accessories and compatibility for pinion/rack drive unit integrated assembling

Rollon Sys

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The Sys linear transfer system consists of higher mechanical performances aluminium alloy rail with deepanodising surface and light alloy extruded roller slides.

  • extremely small section sizes
  • modularity of the system achieved by structural
  • profiles and wide range of accessories
  • special profile section to protect sliding tracks and roller
  • slow friction lame contact roller
  • high resistance polyamide roller surface
  • customizable solutions for the applied loads

Applications such as handling units, Cartesian robots and lift and shift systems are implemented in the following sectors: wood working industry, body in white welding lines, white goods industry, piping and sheet metal working industry.

Attached Files:
MT-Rollon-Sys-210319.pdf

LinMot MagSpring

Manufactured by: LinMot
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

MagSpring products can best be described as “magnetic springs”. The term “spring”, however, is to be understood to mean that MagSpring components generate a constant force over their entire working range, while the characteristic curve for a typical mechanical spring shows an increase in force with increasing displacement. The generation of force that is independent of the stroke makes MagSpring preferable for balancing weight forces in vertical drive applications.

Serapid Horizontal Chains

Manufactured by: Serapid
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

SERAPID push systems provide a mechanical way to move horizontal heavy loads. Just like the vertical lift systems, this is based on the locking and unlocking of flexibly connected, linked elements. When pushing a load, the specially shaped chain links interlock with each other, forming a rigid bar or column. When lowered, the links unlock, allowing it to remain flexible. The chain bends or coils into a compact package.

Rollon Eco System

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The ECO SYSTEM units are linear actuators made of a self-supporting extruded aluminum frame and are driven by a polyurethane belt with AT metric profile steel inserts.

  • Three different sizes available: 60mm, 80mm, 100mm
  • Version available with recirculating ball bearing or roller rails
  • Reduced weight ensured by the light frame and the aluminum sliders
  • High sliding speed

The ECO SYSTEM series actuators are offered with two motion systems:
ECO SYSTEM – SP
Featuring a maintenance free recirculating linear guide rail fitted inside the profile.
ECO SYSTEM – CI
Featuring four rollers with a Gothic arch outer profile sliding on hardened steel bars placed inside the profile.

LinMot Linear Motor Guides

Manufactured by: LinMot
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Series H01 Linear Guides are compact guide units with integrated ball bearings or plain bushings, for operating LinMot P01 linear motors with standard or heavy duty sliders. H01 Linear Guides are used as load bearings, to resist external forces and rotational and bending moments, and as an anti-rotation device. They provide high-precision guidance and allow dynamic
and precise positioning of the load. The load is mounted directly to the front plate of the linear guide. Mechanical dimensions and
mounting options are compatible with pneumatic linear guides. The modular design allows simple addition of accessories, such as a mechanical brake or magnetic spring, for load balancing in vertical applications.

Rollon Smart System

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

E-SMART
The E-SMART series linear units have an extruded and anodized aluminum self-supporting structure with a profile available in four sizes from 30 to 100mm. Transmission is achieved with a polyurethane steel reinforced driving belt. Also featured is a single rail with one or more recirculating ball bearing runner blocks.

R-SMART
The R-SMART series linear units are particularly suitable for: heavy loads, pulling and pushing very heavy weights, demanding work cycles, possible cantilever or gantry mounting, and operation in industrial automated lines. The extruded and anodized aluminum self-supporting structure with a rectangular section is available in three sizes ranging from 120 to 220 mm. Transmission is achieved with a polyurethane steel reinforced driving belt. Also featured is a dual rail system with four or more recirculating ball bearing runner blocks. Multiple sliders are available to further improve load capacity. These units are best used in applications requiring very heavy loads in extremely confined spaces, and where machines cannot be stopped to carry out ordinary system maintenance.

S-SMART
The S-SMART series linear units were designed to meet the vertical motion requirements in gantry applications or for applications where the aluminum profile must be moving and the carriage must be fixed. The self-supporting extruded and anodized aluminum structure is available in three sizes. Since it is a rigid system, it is ideal for a “Z” axis in a 3-axis system by using a linear guide rail. In addition, the S-SMART series has been specifically designed and configured to be easily assembled with the R-SMART series by using a simple bracket.

Rollon Clean Room System

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The ONE series actuators are belt driven linear actuators specifically designed for Clean Room applications. The ONE series is certified compliant with ISO CLASS 3 (DIN EN ISO 14644-1) and CLASS 1 US FED STD 209E cleanroom standards by the Fraunhofer Institute IPA in Stuttgard.
The ONE series reduces particle contamination using a specially designed straight seal that isolates the internals of the actuator from the environment. In addition to particle containment, the ONE series can support a vacuum pump (up to 0,8 bar) to remove and transport contaminates from the interior of the actuator to filtration sites. The 2 vacuum ports are located
on the drive and idle head.
All internal components of the ONE series actuators are designed to minimize particle release. Component materials are limited to stainless steel. Where stainless steel is not an option, special treatments are used to ensure low particle release.
Special lubrication designed for use in cleanroom or vacuum environments are used for all bearings and linear rails

Kollmorgen DS4 & DS6 Series Positioning Table

Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The DS4/DS6 family is a most versatile and modular line of positioning tables. The following features make this series of positioning tables a choice for the most demanding applications. Travel lengths from 50mm-600mm cover a wide range of applications. Precision ballscrew drive, with 5mm and 10mm leads, offer high speed and efficiency, excellent repeartbility and accuracy, and mechanical advantage. The ballscrews can be driven at up to 80rps, translating into speeds (with the 10mm lead) of up to 800mm/s, up to 2m stroke.

Columbus McKinnon Phoenix Telescopic Lifting Column

Manufactured by: Pfaff-silberblau
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The ‘PHOENIX’ telescopic lifting column is a compact lifting system with integrated guiding arrangements made of high quality, anodized precision aluminium profiles, worm gear screw jacsk from the MERKUR range and directly mounted motor. They can be used independently or as a complete lifting system. Synchronisation can be effected electric or via a mechanical connection by means of articulated shafts. Loads to 25,000N, 1000mm stroke.