Mechanical : Product Category

Serapid Horizontal Chains

Manufactured by: Serapid
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

SERAPID push systems provide a mechanical way to move horizontal heavy loads. Just like the vertical lift systems, this is based on the locking and unlocking of flexibly connected, linked elements. When pushing a load, the specially shaped chain links interlock with each other, forming a rigid bar or column. When lowered, the links unlock, allowing it to remain flexible. The chain bends or coils into a compact package.

Berg Miniature Breadboard

Manufactured by: WM Berg Inc
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Designed by practical engineers for use in all mechanical and electro-mechanical breadboard prototype work, test fixture and servo control system applications.

  • All Kits may be enlarged at a later date by the addition of parts from this catalog (see Parts List).
  • Kits are supplied with an attractive carrying case, felt lined to protect the high quality precision gears and associated parts.
  • The supplemental parts kit is a complete precision parts stock room that complements all of the master parts kits. It has a basic selection of the most commonly used parts.
  • Replacement parts are always available from stock.

Ideal for use in:

  • Military Applications
  • Industrial Operations
  • Test Evaluation
  • University Research

Columbus McKinnon Chain Hoists, ATEX Rated

Manufactured by: Columbus McKinnon
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Why explosion protection?
Explosion protection for electrical and mechanical machinery is an important precautionary measure to ensure the safety of persons and all kinds of production, storage and distribution systems, when explosive mixtures of combustible gases, dusts and air may occur.

What does explosion protection achieve?
Explosion protection can mean to generally prevent the occurrence of an explosive mixture. Explosion protection can also be achieved by eliminating potential ignition source in advance, e.g. high temperatures and sparking by designing components accordingly and by permanent monitoring of operation, or by using a flame-proof enclosure for the source of ignition to protect the surrounding area against possible effects of an internal explosion.

Columbus McKinnon Winches

Manufactured by: Columbus McKinnon
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Electric winch model BETA-EX
Capacity 320-7500kg
Electric winches of the series BETA-EX are designed according to the EU Directives 94/9/EG and MRL 2006/42/EG. The models are usable in any place, where the risk of ignition of explosive atmosphere exists (Mixture of air, gases, fumes and dust/air-mixture, respectively). Due to a specially-tailored modular system, the suitable winch for each individual application can be jput together easily. The BEST-EX is characterised by the excellent workmanship in connection with the reliable and stable gear motors.

Rollon Gantry Stage Systems

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Tecline
Linear axes with rack and pinion transmission. Rolling on trapezoidal or recirculating ball guides. High loads and precision positioning. Can be equipped with multiple independent carriages.

Modline Z
Vertical axes with belt transmission. It includes axes with pneumatic counter balance. The pneumatic cylinder is integrated inside the section, which also contains cable conduit. It requires smaller geared motors, it offers higher performances, resulting in cost and energy savigs.

Prismatic Rail
Prismatic steel guides hardened and ground with high carbon content provides for easy assembly and low maintenance requirements. Extremely adaptable, they allow for applications with good accuracy in environments with process contamination.

Modline
Linear axis with belt drive or screw drive. Rolling on trapezoidal, round or recirculating ball guides. Reduced maintenance, silent. Covers resist contamination.

Sys
Modular handling system consisting of aircraft aluminum alloy guides with high mechanical features and hardcoat anodized surface (deep, hard anodisation) and wheel-based rolling blocks. Designed to protect the wheels, it has a small cross-section and is available in various configurations depending on loads and distance between the various supports. Can be integrated with structural sections and a wide range of accessories.

Modular Machine Guard System

Manufactured by: Modular Assembly Technology
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Machine Guard Systems (MGS) is designed for customers with advanced guarding need. The special design of guarding profiles offers more stable structure and better appearance and unique fastening elements bring faster and safer connections. The guarding unit can be with woven meshes, PMMA panels, aluminum composite panels or similar panel materials. Please refer to MGS catalogue for detail usage instructions.

PHT Vertex Precision Planetary Gearbox

Manufactured by: PHT Vertex Precision
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

A planetary gearbox is a mechanical device consisting of sun gear, the planet gears, the planet gears carrier, and the ring gear. Sun gear is located at the center that transmits torque to planet gears orbiting around the sun gear. Planet sun gears are located inside the ring gear. Multi-staged planetary gearbox is available by connecting the individual stage in sequence. With the gear unit combination the individual stage is sized to the torque requirement. A planetary gearbox is a gear system utilized to increase the output torque and reduce load inertia while slowdown the speed. A gearbox provides speed and torque conversions from a rotating power source to another device using gear ratio. It can be used in various situations, such as precise machine tools, and anywhere else mechanical equipment.

Rollon Prismatic Rail

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The Prismatic Rail product family is composed of roller sliders sliding on V-shaped rails made of hardened steel. These linear guides also have high self-alignment properties. V-shaped rails are induction hardened and polished, available in three sizes: 28, 35 and 55 mm. Antioxidation treatment is available upon request on every version. Rails can be machined with two straight cuts, one straight and one slanting cut or two slanting cuts. These options allow to create joinable versions, and thus obtaining longer strokes. The aluminium slider can be configured with a variable number of rollers with steel pins, ranging from 2 to 6. Rollers are in turn available in two variants, cylindrical or V-shaped, with variable diameter from Ø30 a Ø62 depending on rail size.

The most important characteristics:

  • Long life thanks to hardened raceways
  • Optimal reliability in dirty environments
  • Self-aligning system
  • Simple mounting
  • High dynamics

Preferred areas of application:

  • Robot and handling systems
  • Industrial automation
  • Logistics
  • Packaging machines

Rollon Telescopic Guides Automation

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

In the most advanced automation systems, such as industrial machines or automated warehouses, telescopic rails are used for cantilever extractions of mobile parts, and frequently operate under critical conditions such as heavy loads, stressful cycles or dirty environments. If engineers want to obtain the best results possible, they need to choose the right rail. In addition to the technical features, they will also want to consider some variables connected to the use and motion profile, for example: rail orientation, type of stroke, accelerations and maintenance options.

Rollon Plus System

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

This is Rollon’s highly versatile, premier line of completely enclosed belt driven linear actuators.
The ELM series linear units are available in four sizes: 50 – 65 – 80-110 mm. They have a self-supporting structure with a robust profile of extruded and anodized aluminum. The thrust force is transmitted by a steel reinforced, polyurethane belt. The moving carriage is guided and supported by a linear guide system.
A polyurethane sealing strip ensures complete protection of the belt drive and linear guide system against dust, dirt and other contaminants. It avoids the fragility of other sealing systems such as stainless steel strips.
The components used for linear motion and accessories promote a “maintenance-free” system. The pulleys, bearings and drive shafts are among the most robust in the industry. The ELM is the best product for applications in very aggressive working environments that also require high speed duty cycles and position repeatability.

The ROBOT series is particularly well-suited for heavy load applications where significant carriage pitch, yaw or roll moments are applied; or for the linear conveyance of SCARA-type and 6 axis articulated arm robots on a transfer or factory automation line. As a robust, high load choice, the ROBOT Series is the linear actuator for the most demanding applications.
Available in four sizes from 100 mm to 220 mm, the ROBOT series linear units have a rigid structure made by a heavy rectangular cross-section of extruded and anodized aluminum. The thrust force is transmitted by a steel reinforced polyurethane. The carriage is running on two parallel linear guides with four self-lubricated “maintenance-free” caged ball
bearing blocks, positioned to support the carriage and all incident loads and moments.
A polyurethane sealing strip ensures complete protection of the driving belt against dirt, chips, liquids and other contaminants.
The ROBOT series is the clear choice for heavy, high-speed, fluctuating load and moment applications in aggressive environments where repeatable, maintenance-free industrial automation is required.

Chieftek (CPC) ST Series Linear Bearings

Manufactured by: Cheiftek
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

High load and high moment capacity ST Miniature Stroke Slide series incorporate with the design of two rows of ball, the ball track has Gothic profile design with 45 degree contact angle to attain the effect of equal load capacity in all mono block provide more space for the larger rolling elements, enhance the load and moment capacity. High running accuracy and smoothness the steel balls of ST Miniature Stroke Slide series roll on the rail without re-circulation; such brings an excellent running behavior, smoothness, low fiction, and high accuracy. Without vibration.

Pfaff Screw Jacks

Manufactured by: Pfaff-silberblau
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Metric Jacks, 2.5 to 1000 kN, dia 14 to 220mm lift screw, strokes to 9m, ball and trapezoidal screws. The above pdf file is for worm gear screw jacks only.
Motion Technologies are committed to provide the best jacking solutions and support. We stock a comprehensive range of cubic screw jacks and components in the range from 2.5kN to 50kN, choice of worm ratio, rotating or translating screw plus trapezoidal screw diameters from 14 to 80mm diameter.

For screw jack CAD files, click here to generate a CAD file in a choice of the many popular 2D and 2D formats available.

Berg Miniature Couplings & Clutches

Manufactured by: WM Berg Inc
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

W.M. Berg Inc. manufactures a complete line of precision made, high quality couplings. Available in inch and metric sizes and many styles to accommodate any design requirement. Couplings can be placed into the following four categories:

  1. Information Transmitting Couplings – These zero backlash high torsional rigidity couplings, are for precision positioning applications where constant velocity is required for accurate
    feedback control.
  2. Shock Absorbing Couplings – As a result of flexible plastic members connecting their hubs, these couplings dampen vibrations and shock loads and electrically insulate shafting.
  3. Misalignment Couplings – The sliding center elements of these couplings compensate for lateral and angular misalignment caused by tolerance buildup or as a result of mounting.
  4. High Misalignment Couplings – These couplings allow the designer to have shafts that are intentionally offset, laterally or angularly, by a large amount.

Rollon X-Rail

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

This series is a simple and cost effective linear bearing for applications where good load capacity and corrosion resistance are most important. The following are many advantages that the product offers in almost all applications: corrosion resistant even after scratching, etching and chipping; can be used in washdowns; resistant to high temperatures and temperature changes; ecological and recyclable materials.

Attached Files:
MT-Rollon-X-Rail-050419.pdf

Rollon Smart System

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

E-SMART
The E-SMART series linear units are available in four sizes: 30 – 50 – 80 -100 mm. They have a self-supporting structure with a robust profile of extruded and anodized aluminum. The thrust force is transmitted by a steel reinforced, polyurethane belt. The moving carriage is guided and supported by a recirculating ball guide system featuring one or more blocks.

R-SMART
The R-SMART series linear units are particularly suitable for: heavy loads, pulling and pushing very heavy weights, demanding work cycles, possible cantilever or gantry mounting, and operation in industrial automated lines.
The extruded and anodized aluminum self-supporting structure with a rectangular section is available in three sizes ranging from 120 to 220 mm. Transmission is achieved with a polyurethane steel reinforced driving belt. Also featured is a dual rail system with four or more recirculating ball bearing runner blocks. Multiple sliders are available to further improve load capacity.
These units are best used in applications requiring very heavy loads in extremely confined spaces, and where machines cannot be stopped to carry out ordinary system maintenance.

Servomech Ball Screw Jacks

Manufactured by: Servomech s.p.a
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The new range of Servomech ball screw jacks exceeds the application limits of traditional acme screw jacks. High linear speeds, operations up to continuous duty cycle, no wear of the nut, zero axial clearance, exact estimation of expected lifetime, halving of energy consumption and installed power. Servomech screw jacks are able to work under either push or pull load, in different mounting positions (vertically upward/downward or horizontally). Servomech high performance ball screw jacks consist of 3 main series: MA BS Series, SJ Series, HS Series.

H-Fang Dual Axis Drive Slew Rings

Manufactured by: H-Fang
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

3 Frame sizes, 400 Nm, 10,000 Nm, 20,000 Nm, Very low backlash (to 10 arcmin, model dependent)
Motorised to suit customer requirements: Servo motor, Stepper motor (open or closed loop), Brushed DC motors (open or closed loop), Brushless low voltage DC motors (open or closed loop), Hydraulic motors, Pneumatic motors
Position feedback as required: Incremental encoder, Absolute encoder, Resolver, Dual axis motion control to customer requirements.

Kollmorgen Dynamic Servo Actuator

Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

State of the art products in one complete, ready to use assembly. One part number will include everything, a linear actuator, a gear, a flange, necessary couplings, a servo motor and servo drive. All necessary cables, a set of limit switches and a mounting kit are also included. This will significantly reduce the time spent on engineering and component selection.

Spinea Twinspin Bearing Reducer

Manufactured by: Spinea
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Twinspin bearing reducers are high precision bearing reducers based on a new reduction mechanism and a new construction solution using radial-axial rolling bearings and represent a new generation of power-transmission systems.
Available in 9 frame sizes, 33 to 191:1 reduction ratio, 37 to 2940 Nm cont. torque, 1 arc/min backlash, pancake design.
Used for robotics and automation, machine tools, measuring devices, navigation systems, aircraft, military and medical equipment, woodworking, printing, textile and glass working machines, and filling machines. T Series represents the standard version of the TwinSpin bearing reducer. E Series of reducer represents a compact unit with possibility of lifetime sealing and filling by oil.
H Series Hollow Shaft – completely sealed reducer. Larger hole in the input shaft allows the cables, tubes or additional shaft to pass through the reducer.
The Modules with the identification “B” so-called footing modules are of casing construction that enables simple and safe fitting of the module to the base frame.
The modules with the identification “A” are called the flange modules. Their advantage is their small dimensions and weight that what enables their using mainly in moving parts of the rotary positioners.

Haydon Kerk Linear Motion Catalogue & Design Guide for Motorised & Non-Motorised Linear Rails & Slides – Part 3

Manufactured by: Haydon Kerk Motion Solutions
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The linear rails and slides product line should be considered when a more extensive linear motion solution is desired to minimize overall system material cost, engineering time, and assembly cost. The linear rails and slides are complete mechanical systems that can be powered and motorized to include a linear bearing, rotary bearings, mechanical frame, precision screw and nut, and an electronic drive unit. We can also design, engineer and manufacture a multiple-axis configuration specific to your application requirements.

Typical Configurations (Section begins on page 221)
• Travel distances (stroke lengths) up to 90-in (229 cm)
• Motorized or non-motorized
• Optional motor mounting bracket and slots for sensors
• Patented anti-backlash nuts or freewheeling nuts available

Rollon Curviline

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Rollon’s Curvi Line is the cost effective linear solution for applications with linear movement that isn’t always strictly linear. It is a custom solution made according to the application needs and is obtained by an innovative manufacturing process which allows manufacture small quantities (100 pcs) in a cost effective manner.

Nook Precision Screw Assemblies

Manufactured by: Nook
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Nook Industries manufactures precision acme screws by thread rolling, thread milling, or thread grinding processes. Each process produces high precision screws. Nook acme screw products feature centralizing thread forms for smooth, no-wedging performance.
ROLLED ACME SCREWS
Nook offers the largest selection of rolled acme screw sizes in the industry. Rolled thread screws are cost effective and are stocked for quick delivery.
MILLED ACME SCREWS
Milled thread screws allow more variety in journal machining, particularly where a design requires the journal O.D. to be larger than the screw major diameter.
GROUND ACME SCREWS
Ground thread screws offer higher lead accuracy for applications where positioning tolerances are extremely critical.

Nook Worm Gear Screw Jacks

Manufactured by: Nook
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The ActionJac Worm Gear Screw Jack systems are ruggedly designed and produced in standard models with load handling capacities from 1/4ton to 100tons. They may be used individually or in multiple arrangements. There are no “standard” travel lengths and each Worm Gear Screw Jack is built to specifiction.

Rollon Eco System

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The ECO SYSTEM units are linear actuators made of a self-supporting extruded aluminum frame and are driven by a polyurethane belt with AT metric profile steel inserts.

  • Three different sizes available: 60mm, 80mm, 100mm
  • Version available with recirculating ball bearing or roller rails
  • Reduced weight ensured by the light frame and the aluminum sliders
  • High sliding speed

The ECO SYSTEM series actuators are offered with two motion systems:
ECO SYSTEM – SP
Featuring a maintenance free recirculating linear guide rail fitted inside the profile.
ECO SYSTEM – CI
Featuring four rollers with a Gothic arch outer profile sliding on hardened steel bars placed inside the profile.

Modular Conveyor System

Manufactured by: Modular Assembly Technology
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Modular Conveyor System (MCS) adopts advanced manufacturing concept, providing products made in mold, standardized and modularized. They are widely used in car component production, electronic, home appliance, mechanical, logistics, tobacco, packing, building material, cosmetic, food, pharmaceutical, photovoltaic and other industry.

Berg Miniature Hardware and Fasteners

Manufactured by: WM Berg Inc
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

WM Berg offers every fastener required for precision mechanical designs.
Machine, set, soft tip set, shoulder, captive, thumb and seal screws, hex nuts, flat washers, thrust washers, swivel washers, shim spacers, shaft spacers, Belleville washers, curved washers and threaded inserts are stocked in sizes ranging from #0-80 screw size (M1,6) up to ¼” diameter (M10).
Groove, taper, roll, spiral, clevis, cotter and dowel pins, retainer rings and shims are offered in sizes ranging from 1/32″ (1mm) to 1″ (25mm).
Compression, extensions and torsion springs are stocked in sizes ranging from .008″ wire diameter to .075″ wire diameter. Also available in metric sizes.

Kollmorgen DS4 & DS6 Series Positioning Table

Manufactured by: Kollmorgen
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The DS4/DS6 family is a most versatile and modular line of positioning tables. The following features make this series of positioning tables a choice for the most demanding applications. Travel lengths from 50mm-600mm cover a wide range of applications. Precision ballscrew drive, with 5mm and 10mm leads, offer high speed and efficiency, excellent repeartbility and accuracy, and mechanical advantage. The ballscrews can be driven at up to 80rps, translating into speeds (with the 10mm lead) of up to 800mm/s, up to 2m stroke.

Columbus McKinnon Stainless Steel Screw Jacks

Manufactured by: Columbus McKinnon
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The completely new series of stainless steel screw jacks for a load range of 30kN to 250 kN has been designed to meet that harsh requirements of e.g. modern paper machines. This new series is based on a standard modular system which can be combined individually. By application of high-grade steel innovative technology, this lifting solution can absolutely be used for steel hydraulics construction, food industry as well in explosion-proof areas.
Especially for applications in paper manufacture, the new stainless steel series of Pfaff-siberblau is ideal:

  • Plate adjustment in refiners
  • Lip adjustment and/or positioning
  • For tensioning of strainer
  • For tensioning of felt for the cover opening of the drying actuator
  • As tambour lift
  • To lift and lower the tambour

Regardless of whether in basic design as series SHE-S or in swivel design as series SSP – our high quality and innovative technology stands for safety, availability and reliability.
A wide range of options and accessories ensure an optimal tuning between the components (stainless steel flexible shafts, couplings and bevel gear.

Rollon Clean Room System

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The ONE series actuators are belt driven linear actuators specifically designed for Clean Room applications. The ONE series is certified compliant with ISO CLASS 3 (DIN EN ISO 14644-1) and CLASS 1 US FED STD 209E cleanroom standards by the Fraunhofer Institute IPA in Stuttgard.
The ONE series reduces particle contamination using a specially designed straight seal that isolates the internals of the actuator from the environment. In addition to particle containment, the ONE series can support a vacuum pump (up to 0,8 bar) to remove and transport contaminates from the interior of the actuator to filtration sites. The 2 vacuum ports are located
on the drive and idle head.
All internal components of the ONE series actuators are designed to minimize particle release. Component materials are limited to stainless steel. Where stainless steel is not an option, special treatments are used to ensure low particle release.
Special lubrication designed for use in cleanroom or vacuum environments are used for all bearings and linear rails

Rollon Speedy Rail

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Speedy Rail beam is a heat-treated aluminium alloy profile with hollow cross-sections which makes it very strong under torsion and deflection stresses. Beams are then subject to a special patented treatment which provides a smooth, hard (700 HV) surface comparable to tempered steel. The fusion point of the non-stick surface layer (2100°C) permits an excellent resistance to welding splatters. For these reasons the Speedy Rail® beams and components are widely used in the automotive industry to build transfer systems (lift & carry) for automated welding lines.

Features and user benefits:

  • Wide range of linear transport applications
  • Standard modular components
  • All parts reusable
  • Minimum space required
  • Narrow profile
  • Hard surface
  • Resistance to welding splatters
  • Quiet smooth operations
  • Resistance to high corrosion
  • Easy to assemble
  • Saving in assembly time
  • Strong, lightweight
  • Savings in reducing drive size
  • Only hand tools required to assemble or modify

Columbus McKinnon Phoenix Telescopic Lifting Column

Manufactured by: Pfaff-silberblau
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The ‘PHOENIX’ telescopic lifting column is a compact lifting system with integrated guiding arrangements made of high quality, anodized precision aluminium profiles, worm gear screw jacsk from the MERKUR range and directly mounted motor. They can be used independently or as a complete lifting system. Synchronisation can be effected electric or via a mechanical connection by means of articulated shafts. Loads to 25,000N, 1000mm stroke.

LinMot Miniature Linear Motors and Modules

Manufactured by: LinMot
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Miniature direct drive linear motors of tubular ironless construction with LinMot digital drives are very compact size and suitable for applications that lack space.
Linear modules are motors ready to use with integrated linear guides and linear motors. Built with precision ball sliders and rails which allow high force and torque loads.

Rollon O-Rail

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The roller linear system O-Rail offers the maximum flexibility configuration due to the original shape of the guide with 3 raceways arranged at 90 ° to each other where on each of those can slide rollers R..43G series. Using a single guide, two, or more parallel guides, gives rise to a number of combinations capable of satisfying each specific need for linear motion and offering exceptional self-alignment capacity. O-Rail is constructed in high strength steel hardened with hardening treatments, for a further improvement of both performance and durability.
O-Rail is designed to be a strong and simple multitask linear system for larger handling and automation applications. It is an easy to assemble system, that offers smooth motion even on inaccurate surfaces.

Attached Files:
MT-Rollon-O-Rail-050419.pdf

Transtecno AC Worm Gearbox

Manufactured by: Transtecno
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The high degree of modularity is a design feature of CM and CMP worm gearboxes range thanks to a wide selection of input and output kits.
Main features of CM and CMP range are:

  • Die-cast aluminum housing on sizes 026, 030, 040, 050, 063,075, 090 and 110. Cast iron housing on size 130
  • Double taper roller bearing on sizes 090, 110 and 130
  • Die-cast aluminum housing on pre-stage units
  • Permanent synthetic oil long-life lubrication.

Duff-Norton Linear Actuators

Manufactured by: Duff-Norton
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

Duff-Norton linear actuator products are specially designed for a variety of industrial and commercial applications. Our actuators are used for opening and closing, tilting and pivoting, lifting, lowering and positioning.

Rollon Easy Slide

Manufactured by: Rollon SpA
Sold and Serviced by Motion Technologies Pty Ltd. Ph +61 2 9524 4782.

The Easyslide series is a system of drawn steel linear rails with induction hardened raceways. The system consists of an “C” shaped linear profile rail, and one or more internal sliders with caged recirculating ball bearings.

The most important characteristics:

  • Guide rails and sliders of SN series are made of cold-drawn bearing steel
  • Ball cage is made of steel for the SN series
  • Balls are made of hardened bearing steel
  • Raceways of the guide rails and sliders are induction hardened (ground for the SNK series)
  • Long service life
  • With recirculating ball bearings for the SNK series