Motion Technologies Pty Limited


Rollon Uniline System

Rollon Uniline System is a family of ready-to-install linear actuators. They consist of internal Compact Rail roller sliders and steel-reinforced polyurethane belts in a rigid aluminium profile. Longitudinal seals enclose the system. This arrangement provides the best protection for the actuator from soiling and damage. In the A series, the fixed bearing rail (T-rail) is mounted horizontally in the aluminium profile. Versions with long (L) or double (D) sliders in one axis are possible.

The most important characteristics:

  • Compact design
  • Protected internal linear guides
  • High traversing speeds
  • Grease-free operation possible (depending on the application. For further information, please contact our Application Engineering department)
  • High versatility
  • Long strokes
  • Versions with long or multiple sliders available in one linear axis

Preferred areas of application:

  • Handling and automation
  • Multi-axis gantries
  • Packaging machines
  • Cutting machines
  • Displaceable panels
  • Painting installations
  • Welding robots
  • Special machines

Technical data:

  • Available sizes [mm]:
    Type A: 40, 55, 75, 100
  • Length and stroke tolerances:
    For strokes <1 m: +0 mm to +10 mm (+0 in to 0.4 in)
    For strokes >1 m: +0 mm to +15 mm (+0 in to 0.59 in)

Manufactured by: Rollon
Sold and Serviced by Motion Technologies Pty Limited

Rollon Uniline System
Back to Top