Motion Technologies Pty Limited

Home Page / ELECTRICAL / MOTORS / STEPPER / 2 PHASE / FULLING STEPPER MOTORS

Fulling Stepper Motors

Fulling are ISO 9001 qualified for the design and manufacture a complete range of stepper motors producing over 5.5 million motors/year.

They are classified into many different types in the below catalogue, those being:

  • Standard, 1.8° 2 phase, 4 wire, frames 42, 57 and 86
  • Classic, hybrid 4 or 6 wire,
    • 0.9° 2 phase, frames 35, 36, 39, 42 and 57
    • 1.2° 3 phase, 3 wire, frames 42, 57, 60, 86 and 110
    • 1.8° 2 phase, 4 or 6 wire, frames 14, 20, 25, 28, 35, 39, 42, 46, 57, 60, 63, 86 and 110
  • 3.6° 2 phase, 4 or 6 wire, frame size 42
  • Integrated connector type, 1.8° 2 phase, 4 or 6 wire, frame 20, 28, 35, 42, 57 and 60.
  • Enhanced torque, 1.8° 2 phase, 4 or 6 wire, frames 57 and 60
  • Waterproof, IP65, 1.8° 2 phase, 4 wire, frames 42, 57, 60 and 86
  • With hollow output shaft, 1.8° 2 phase, 4 or 6 wire, frames 20, 28, 35, 42, 57 and 86
  • With integrated driver, 1.8° 2 phase, frames 42 and 47
  • With spur gearbox, frames 42, 57, 86 with reduction ratios to 30:1
  • With planetary reducer, frames 22, 28, 42, 56 and 60 with reduction ratios to 1,300:1
  • Linear actuator, non-captive, captive, external, NEMA 8, 11, 14, 17 and 23
  • PM tin can motor, step angle 7.5° to 18°, frames 10, 15, 20, 25, 35, 42, 49 and 57
  • PM tin can geared motor, sizes 15, 25, 35 and 42, gear ratios to 1200:1
  • PM linear actuator, non-captive, captive, external, sizes 15, 20, 25, 28, 35, 42 and 57

Manufactured by: Fulling
Sold and Serviced by Motion Technologies Pty Limited

Fulling Stepper Motor
Back to Top