Motion Technologies Pty Limited

JVL

JVL Rotary Actuators for Stepper and Servo Motors

JVL Rotary Actuators for Stepper and Servo Motors are a series of Hollow Rotary Actuators that offer the easiest possible installation of rotary table applications. Depending on the application you can choose between servo and stepper motors with or without built-in (absolute) encoders.

Mechanically they are ready to install and mounting of rotating discs has never been easier.

This solution is offered with drives integrated to the motor and provide a large range of connectivity to all major industrial protocols including EtherCAT, Modbus, etc.

In this series there is a choice 54 combinations:

  • 5 Nm to 142 Nm output torque
  • Gear ratios from 5:1 to 100:1
  • High moment carrying capacities
  • Very low backlash
  • IP65 sealing

Manufactured by: JVL
Sold and Serviced by Motion Technologies Pty Limited

JVL HLMT Rotary Actuators for ServoStep and MAC Motor

JVL MAC Motor

JVL MAC motors are an all-in-one integrated servo motor with ePLC, brake, multiturn encoder and support for all Ethernet protocols.

Benefits of integrated motors
The benefits of integrated motors are that they do not take up space in the control cabinet, and are all-in-one units. All electronics are combined in the same metal housing for high EMC safety.

ePLC™ embedded PLC
All JVL motors have ePLC™ built-in with up to 13 IO points. It enables <1 ms reactions times and can work together with a master PLC running Ethernet. Graphical point-n-click programming.

Ethernet with protocol change
This unique feature gives you the flexibility to change protocol between Profinet, EtherNet/IP, Sercos, EtherCAT, Powerlink and Modbus TCP/UDP on any JVL motor. It is easy with JVL’s MacTalk® software.

Manufactured by: JVL
Sold and Serviced by Motion Technologies Pty Limited

JVL MAC Motor

JVL ServoStep

JVL ServoStep are an all-in-one integrated stepper motor with closed-loop, ePLC, multiturn encoder and support for all Ethernet protocols

Benefits of integrated motors
The benefits of integrated motors are that they do not take up space in the control cabinet, and are all-in-one units. All electronics are combined in the same metal housing for high EMC safety.

ePLC™ embedded PLC
All JVL motors have ePLC™ built-in with up to 8 IO points. It enables <1 ms reactions times and can work together with a master PLC running Ethernet. Graphical point-n-click programming.

Ethernet with protocol change
This unique feature gives you the flexibility to change protocol between Profinet, EtherNet/IP, Sercos, EtherCAT, Powerlink and Modbus TCP/UDP on any JVL motor. It is easy with JVL’s MacTalk® software.

Manufactured by: JVL
Sold and Serviced by Motion Technologies Pty Limited

JVL StepServo