Motion Technologies Pty Limited

LinMot

LinMot’s Product Range at a Glance

LinMot Overview

The LinMot system features are designed for:

  • Replacements for pneumatic cylinder and linear servo applications where higher speeds, acceleration ,positioning and holding are required
  • Simplicity with only one moving part
  • Are all stainless steel and will suit very harsh and wet environments ( IP67 )
  • Stroke lengths from 50mm to 1460mm
  • Speeds up to 3 m/sec
  • Repeatability to +/- 0.05mm with base unit straight out of the box or +/- 0.001mm with external position sensor
  • Accelerations to 400 m/s2 and forces to 585N (1200N model coming) with outstanding user-friendly programmability, accuracy and inter-connectivity.

Manufactured by: LinMot
Sold and Serviced by Motion Technologies Pty Limited

LinMot Overview

LinMot Catalogue

The LinMot system features are designed for:

  • Replacements for pneumatic cylinder and linear servo applications where higher speeds, acceleration ,positioning and holding are required
  • Simplicity with only one moving part
  • Are all stainless steel and will suit very harsh and wet environments ( IP67 )
  • Stroke lengths from 50mm to 1460mm
  • Speeds up to 3 m/sec
  • Repeatability to +/- 0.05mm with base unit straight out of the box or +/- 0.001mm with external position sensor
  • Accelerations to 400 m/s2 and forces to 585N (1200N model coming) with outstanding user-friendly programmability, accuracy and inter-connectivity.

Manufactured by: LinMot
Sold and Serviced by Motion Technologies Pty Limited

LinMot Catalogue

LinMot Bottle Closure Application

LinMot linear rotary motors have been developed for closure and screw driving processes, allowing flexible closure and screw driving processes to be implemented easily.

  • One physical axis with independently programmable linear and rotary motions
  • Open parameterization of positions, linear speed, rotary speed, force and torque
  • Readout of torque, rotary speed, angle, vertical position, linear speed, and force
  • Can be integrated in any control system

Manufactured by: LinMot
Sold and Serviced by Motion Technologies Pty Limited

LinMot Bottle Closure Application

LinMot Cost Optimisation for Linear Motor

LinMot Cost Optimisation for Linear Motor has the following features:

GREATER FLEXIBILITY AND DYNAMICS
Especially when more than two positions are required, when positions need to be changed by software, when motions are synchronized to a main drive, or when the dynamics and service life of a pneumatic cylinder are simply not sufficient, designers gladly turn to linear direct drives from LinMot.

SIMPLE START-UP
By integrating the control of position, speed, acceleration, and force, commissioning is made much easier. Motion parameters are calculated when the project is laid out, and can be adopted directly during commissioning.

IMPROVED PROCESS STABILITY
Unlike pneumatic cylinders, where only the end positions are checked, the position of a linear motor is constantly controlled and monitored. This leads to much greater process stability, because very small deviations can be detected when needed.

REPLACEMENT PAYS OFF EVEN FOR SIMPLE MOTIONS
Due to high operating costs for pneumatics, the use of industrial linear motors pays off to an increasing degree, even for simple point-to-point motions with only two end positions. This is especially true when motions are performed regularly in cyclical operations, and pneumatic cylinders need to be oversized due to speed and load conditions. In this case, the energy and maintenance costs exceed the investment costs within a few weeks (see example, below).

SIMILAR CONFIGURATION MAKES REPLACEMENT EASY
Industrial linear motors have a cylindrical form factor and similar dimensions to pneumatic cylinders. For this reason, they are commonly used as replacements for pneumatic actuators in existing and new designs.

ADVANTAGES OF INDUSTRIAL LINEAR MOTORS

  • Freely positionable
  • Extremely dynamic
  • Long Service Life
  • Adjustable speed
  • Monitored motions
  • Low maintenance costs
  • Adjustable acceleration
  • Gentle motions
  • Hygiene (no air)
  • Programmable force
  • Synchronization capability
  • Low energy costs

Manufactured by: LinMot
Sold and Serviced by Motion Technologies Pty Limited

LinMot Cost Optimisation for Linear Motors

LinMot P04 Linear Motor

LinMot P04 Linear Motor has all the benefits of the familiar tubular linear motor and the additional advantage of an integrated linear guidance. The P04-actuator can be equipped with mechanical accessories which are known from pneumatics.

Manufactured by: LinMot
Sold and Serviced by Motion Technologies Pty Limited

LinMot P04 Linear Motor

LinMot Stainless Steel Motor IP69K

LinMot introduces a complete new Linear Motor family P01-48×240-SSC in Stainless Steel 1.4404/316 with the outstanding protection rating IP69K designed for applications in food, pharmaceutical and packaging machines. The new motor has a diameter of 60mm and an over all length of 350mm. It will be available with or without integrated water cooling with peak forces up to 500N

Manufactured by: LinMot
Sold and Serviced by Motion Technologies Pty Limited

LinMot Stainless Steel Motor IP69K

LinMot Industrial Linear Motor Guides

LinMot Industrial Linear Motor Guides Series H01 are compact guide units with integrated ball bearings or plain bushings, for operating LinMot P01 linear motors with standard or heavy duty sliders. H01 Linear Guides are used as load bearings, to resist external forces and rotational and bending moments, and as an anti-rotation device. They provide high-precision guidance and allow dynamic and precise positioning of the load. The load is mounted directly to the front plate of the linear guide. Mechanical dimensions and mounting options are compatible with pneumatic linear guides. The modular design allows simple addition of accessories, such as a mechanical brake or magnetic spring, for load balancing in vertical applications.

Manufactured by: LinMot
Sold and Serviced by Motion Technologies Pty Limited

LinMot MagSpring

MagSpring products can best be described as “magnetic springs”. The term “spring”, however, is to be understood to mean that MagSpring components generate a constant force over their entire working range, while the characteristic curve for a typical mechanical spring shows an increase in force with increasing displacement. The generation of force that is independent of the stroke makes MagSpring preferable for balancing weight forces in vertical drive applications.

Manufactured by: LinMot
Sold and Serviced by Motion Technologies Pty Limited

LinMot MagSpring

LinRot Linear-Rotary Motors

LinRot Linear-Rotary Motors are a combined unit with integral linear and rotary servo motor for dual axis motion.

Manufactured by: LinMot
Sold and Serviced by Motion Technologies Pty Limited

LinRot Linear Rotary Motors