Motion Technologies Pty Limited

Home Page / PRODUCTS / LINEAR ACTUATORS

Linear Actuators

LEA3 Series Actuators

The LEA3 Series Actuators has the following key features:

  • Small industrial actuators
  • Low cost
  • Double clevis mount
  • 12 and 24vDC
  • Up to 750N thrust
  • Up to 300mm stroke
  • Up to 45mm/sec travel rate
  • IP65 sealing option
  • Potentiometer feedback option
  • Available from stock

Manufactured by: Various
Sold and Serviced by Motion Technologies Pty Limited

LEA3 Linear Actuator

Linear-Mech Compact Actuators

The Linear-Mech Compact Actuators has the following key features:

  • Series CLA20/25/30/10
  • Thrusts of 200/400/8000/1200N
  • Strokes to 500mm
  • Speed to 45mm/sec
  • AC or DC motors
  • Potentiometer feedback option

Manufactured by: Servomech
Sold and Serviced by Motion Technologies Pty Limited

Linear-Mech Compact Actuators

JACTON LAP/LA Electric Linear Cylinders

JACTON LAP Electric Linear Cylinder series incorporate a parallel motor design

JACTON LA Electric Linear Cylinder series are an in-line motor/cylinder design

These cylinders incorporate switch devices to indicate that the cylinder has stopped due to overload or jamming mid stroke, either while extending or retracting. They are separate switches to end of travel limit switches which are optional.

A further significant feature is that they use IEC motor mounts which enables the use of any AC motor. This allows the use of Australian Standard motors including explosionproof and mine motors as well as servo motors which can be readily adapted if required.

  • Motor power up to 18.5 kW
  • Speed up to 84 mm/sec
  • Thrust up to 25 kN

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JTE Screw Jack Electric Cylinders

JACTON JTE Screw Jack Electric Cylinders series are a conventional screw jack built with an integral cylinder and thrust tube to fully enclose the screw with a guided piston cylinder.

They provide an alternate choice to hydraulic and pneumatic cylinders that are clean and reliable without oil or air leaks to provide a solution that is speed & position controlled and self-locking.

Key Features:

  • Ball or machine screw versions
  • 4 sizes from 2.5 to 20 tons
  • 2 gear ratios
  • Rear clevis and trunnions mounts available.
  • Can be connected together in systems to enable multiple units to be synchronised to operated and controlled together, see below System Arrangement catalogue here for typical arrangements.
  • Many accessories are available, see Accessories catalogue here
  • Motor mounts available on request, see examples here

Manufactured by: JACTON
Sold and Serviced by Motion Technologies Pty Limited

JACTON JTE Screw Jack Electric Cylinders

Cosmic Motor Cylinder

Cosmic Motor Cylinder has the following key features:

  • Thrust 100kg – 30000kg
  • Stroke 20mm – 2000mm
  • Output 0.13kW – 11kW

Manufactured by: Cosmic
Sold and Serviced by Motion Technologies Pty Limited

Cosmic Motor Cylinder

Cosmic Synchronised Electric Power Cylinders

Cosmic Synchronised Electric Power Cylinder has the following key features:

  • Thrust from 0.5T – 100T
  • Stroke to 2m
  • Speed to 150mm/sec

Manufactured by: Cosmic
Sold and Serviced by Motion Technologies Pty Limited

Cosmic Synchronised Electric Power Cylinders

Haydon Kerk Lead Screw, Nut Assemblies, Linear Actuators and Linear Rail Systems

Haydon Kerk Lead Screw, Nut Assemblies, Linear Actuators and Linear Rail Systems comprise of the following components:

  • Precision Lead Screw and Nut assemblies, Ø2 to Ø24 mm, leads from 9.3 to 97 mm.
  • Linear Actuators with integral stepper motors, hybrid or can-stack design.
  • Dual Motion Motors (combined linear and rotary motion)
  • Muti-axis Motion System, Z-Theta (long stroke)
  • Linear Rail Systems with integral linear bearings, motorised or non-motorised actuator.
  • Linear Spine Shaft systems, Ø3 to Ø19

Manufactured by: Haydon Kerk
Sold and Serviced by Motion Technologies Pty Limited

Haydon Kerk Dual Motion Actuators

Haydon Kerk Dual Motion Actuators are based on a unique, patented designs and incorporate proven motor technology. Units simplify product development by replacing what would otherwise be far more bulky and complex mechanisms.

Another feature of this design is to provide an electric motor in which linear and rotary motions are controllable independently of one another.

For a rotary/linear motor, it is desirable that the linear and rotary motions be controllable independently of one another. These devices can be run using a standard two axis stepper motor driver. Performance can be enhanced using chopper and/or microstepping drives.

Manufactured by: Haydon Kerk
Sold and Serviced by Motion Technologies Pty Limited

Back to Top