MOONS’
Quick links to catalogues
MOONS’ BLDC Motors
MOONS’ BLDC Motors have the following features:
Characteristics:
- Wide range of speed control and smooth torque output
- Excellent speed stability
- Small size, high power
- Low temperature rise, low noise, low vibration
- Long life, low maintenance costs
- Low positioning torque
- Energy efficient
Applications:
- Mechanical automation (textile machine)
- Financial automation (ATM)
- Office equipment (printer)
- Solar energy equipment
- Drive system
- Speed setting and regulation devices in various industries
- Automotive on-board equipment
- Pump (metering pump)
- Food industry
- Sorting equipment
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ MDX Series Integrated Servo Motor
MOONS’ MDX series, integrated servo motors are used to create decentralized motion control solutions in very compact units. They consist of a servo motor, feedback sensor and drive/controller system. They are controlled via a communication bus, or I/O interface (Q Program). The integrated servo motor is designed with a synchronous servo motor, thus providing a number of possibilities for users in a wide variety of applications.
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ SS Step Servo Systems
MOONS’ SS Step-Servo Systems are an innovative revolution for the world of stepper motor, it enhances the stepper motors with servo technology to create a product with exceptional feature and broad capability. Complementary motors are equipped with high resolution encoders.
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ SS EC Step Servo Systems
MOONS’ SS-EC is a member of the Step-Servo family equipped with built-in EtherCAT communication interface. This drive can operate as a standard EtherCAT slave using CANopen over EtherCAT (CoE). This drive can be combined with various associated step servo motors. Complementary motors are equipped with high resolution encoders.
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ STF Stepper Drives Family
MOONS’ STF Stepper Drives series are high performance fieldbus control stepper drive which also integrates with built-in motion controller. The drives can be controlled by SCL, Modbus, CANopen, eSCL, EtherNet/IP or EtherCAT in real time. Motion profiles can also be programmed and stored in drives (Q Program) and then be triggered by fieldbus commands. These drives are designed for connection to any open loop stepper motor without feedback.
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ SR Series Two Phase
MOONS’ SR Series Two Phase DC Stepper Motor Drives with DC Input, DIP and Rotary Switch setting, Pulse & Direction Control Drive. They are cost-effective, high performance step drives. The design is based on advanced digital current control technology and features high torque, low noise and low vibration. The running current, microstep resolution and other parameters are switch selectable.
- Settable current from 0.3 to 7.8 amps
- Supply voltage 12 to 75 VDC
- Advanced Current Control
- Torque Ripple Smoothing
- Anti-Resonance
- Microstep Emulation
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ ST Series Two Phase
MOONS’ ST Series Two Phase DC Stepper Motor Drives series integrate motion control capability that support stand-alone programming and various bus control as RS-232/485, Ethernet UDP/TCP, CANopen and EtherNet/IP. They are compact digital stepper drives with multiple control options and many sophisticated features. Step motors run smoother and faster than ever with features of advanced current control. With multiple control options, ST series support stand-alone control mode Q programming and various industry field bus controls as RS-232/485, Ethernet UDP/TCP, CANopen and Ethernet/IP. The ST series also has optional encoder feedback with closed loop for improved system performance and reliability.
- Settable current from 0.1 to 10.0 amps
- Supply voltage 24 to 80 VDC
- Anti-Resonance
- Microstep Emulation
- Torque Ripple Smoothing
- Stall detection & Stall prevention
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ SRAC Series Two Phase
MOONS’ SRAC Series Two Phase AC Stepper Motor Drives feature advanced Current Control, Torque Ripple Smoothing, Anti-Resonance, Microstep Emulation. They are cost-effective, high performance step drives. The design is based on advanced digital current control technology, and features high torque, low noise, and low vibration. The running current, microstep resolution and other parameters are switch selectable.
- Settable current from 0.5 to 2.55 amps
- Supply voltage 94 to 265 VAC
- Advanced Current Control
- Torque Ripple Smoothing
- Anti-Resonance
- Microstep Emulation
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ STAC Series Two Phase
MOONS’ STAC Series Two Phase AC Stepper Motor Drives support stand-alone programming and various bus controls such as RS-232/485, Ethernet UDP/TCP, CANopen and EtherNet/IP. AC input high performance digital stepper drives have multiple control options and many sophisticated features. The STAC series support stand-alone programming and various bus control as RS-232/485, Ethernet UDP/TCP, CANopen and EtherNet/IP.
- Settable current from 0.5 to 2.55 amps
- Supply voltage 94 to 265 VAC
- Advanced Current Control
- Torque Ripple Smoothing
- Anti-Resonance
- Microstep Emulation
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ Step Servo EtherCAT Drive
MOONS’ Step Servo EtherCAT Drive SS-EC is a member of the Step-Servo family equipped with a built-in EtherCAT communication interface. This drive can operate as a standard EtherCAT slave using CANopen over EtherCAT (CoE). It is designed to work with various MOONS’ Step servo motors.
- Programmable, digital step-servo drive and motor package
- Operates from a 24 to 70 volt DC power supply
- CANopen over EtherCAT (CoE) with full support of CiA402. Based on the widely used 100BASE-TX cabling system and with a baud rate of 100Mbps full duplex, EtherCAT enables high speed and highly reliable communication
- Support modes: Profile Position, Profile Velocity, Profile Torque, Cyclic Synchronous Position, Cyclic
Synchronous Velocity and Homing; as well as MOONS’ own Q mode - Dual port EtherCAT communication
- USB port for configuration
- Encoder resolution: 20000 counts/rev for AM17/23/24/34SS motor, 4096 counts/rev for AM11SS motor
- SS03-EC output current: continuous 3A, boost 4.5A
- SS05-EC output current: continuous 5A, boost 7.5A
- SS10-EC output current: continuous 10A, boost 15A
- 8 optically isolated digital inputs, 5-24VDC high level voltage
- 4 optically isolated digital outputs, max 30V/100mA sink or source current
- 2 analog inputs, can be configured to 0-5V, 0-10V, ±5V or ±10V signal ranges
- Differential encoder signal output (AOUT+/-, BOUT+/-, ZOUT+/-), 26C31 line driver, 20mA sink or source current
- Auxiliary power supply for keep alive operation
- Front panel with 4 keys and 5 digital LED display for setting parameters
- STO function (Safe Torque Off)
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ TXM Step Servo System
MOONS’ TXM Step Servo Systems has the following key features:
- Multi-functional capability
- Closed loop
- Easy tuning
- Lower heating/high efficiency
- Smooth & accurate
- Fast response
- High torque
- Motion monitoring
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ Integrated Stepper Motor STM
MOONS’ Integrated Stepper Motor STM has the following features:
Anti-Resonance
Step motor systems have a natural tendency to resonate at certain speeds. The STM drive+motor automatically calculates the system’s natural frequency and applies damping to the control algorithm. This greatly improves midrange stability, allows for higher speeds, greater torque utilization and also improves settling times.
Microstep Emulation
With Microstep Emulation, low resolution systems can still provide smooth motion. The drive can take low-resolution step pulses and create fine resolution micro-step motion.
Torque Ripple Smoothing
All step motors have an inherent low speed torque ripple that can affect the motion of the motor. By analyzing this torque ripple the system can apply a negative harmonic to negate this effect, which gives the motor much smoother motion at low speed.
Command Signal Smoothing
Command Signal smoothing can soften the effect of immediate changes in velocity and direction, making the motion of the motor less jerky. An added advantage is that it can reduce the wear on mechanical components. Allows for three current settings to help the motor run cooler and reduce power consumption.
- Running Current – the current the drive will deliver for continuous motion.
- Accel Current – the current the drive will deliver when accelerating or decelerating.
- Idle Current – reduces current draw when motor is stationary.
Self Test & Auto Setup
At start-up the drive measures motor parameters, including the resistance and inductance, then uses this information to optimize the system performance.
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ M2 Series AC Servo System
MOONS’ M2 Series AC Servo System can accomplish real time response to the dynamic feedback of the load and optimize gain tuning parameters on-line automatically. This auto tuning function can greatly save debugging time and simplify the debugging procedure. These all can be done by the PC based software in only a few minutes.
M2 servo system has advanced anti vibration function which include anti resonance and vibration damping. Anti resonance uses two notch filters to overcome the resonance from the natural mechanical characteristic of the system. Vibration damping uses an adjustable damping ratio in the controller to improve the damping characteristic of the system, which can reduce the vibration of the system.
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ TSM Integrated Step Servo
MOONS’ TSM Integrated Step-Servo is an innovative revolution for the world of stepper motor, it enhances the stepper motors with servo technology to create a product with exceptional feature and broad capability.
TSM is MOONS’ 3rd generation integrated Step-Servo and compact motor+drive+encoder+controller all-in-one solution. With improved technology, TSM upgrades significant key features based on 2nd generation SSM and operates more efficient and intelligent.
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
MOONS’ Low Voltage BLDC Servo Motors and Drives
The M2DC Series Servo System from MOONS’ features drives that are high on functionality with a range of control options, programmable notch filters, an anti-vibration algorithm and auto-tuning.
The drives are designed to be used with MOONS’ servo motors in the 60/100/200/300/400/550/750 Watt power range.
The M2DC drives can communicate over Modbus/RTU, Ethernet/IP and Ethernet (eSCL).
Using MOONS’ Q Programmer software they can create complex motion programs that can be stored in the drive and then run in a stand-alone mode.
Features:
- Compact size, single and dual-axis design options
- Wide range of power input, main power voltage 24～60VDC
- Optional AUX power voltage 24VDC ±10%
- Up to rated output current 20 Arms, peak current 60 Arms for each axis
- Compatible with 60 W～750 W servo motors
- Wireless debugging interface up to 20 m transmission distance
- Drive over-current, over-voltage, over-temperature and motor over- temperature protection
- Motor over- temperature protection
Highlights:
- Built-in software PLC—Q program
- STO complicate with SIL2 level
- Tuning-less and auto-tuning function
- Synchronous shutdown when fault occurs
- Field bus communication watch dog and emergency stop
- Control algorithm to achieve motor collision protection
Manufactured by: MOONS’
Sold and Serviced by Motion Technologies Pty Limited
